specifications pin material: brass alloy 360, 1/2 hard swage pins are annealed dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 order code: 2xxx - x - 00 - xx - 00 - 00 - 07 - 0 basic part # specify pin finish: 01 200 " tin/lead over nickel 44 300 " silver over copper 50 300 " electro-solder (60/40 snpb) mill-max-mfg.corp., p.o. box 300, 190 pine hollow road, oyster bay, ny 11771-0300.tel: 516-922-6000 fax: 516-922-9253 187 2110-x-00-xx-00-00-07-0 swage mount in .052 hole 2110 2821-x-00-xx-00-00-07-0 swage mount in .125 hole 2821 2316-x-00-xx-00-00-07-0 swage mount in .064 hole 2317-x-00-xx-00-00-07-0 swage mount in .064 hole 2333-x-00-xx-00-00-07-0 press-fit and swage in .052 mounting hole 2333 2533-0-00-xx-00-00-07-0 press-fit & swage in .052 mtg. hole. for .062 thick board 2533 2708-x-00-xx-00-00-07-0 swage mount in .120 hole 2101-3-00-xx-00-00-07-0 press-fit in .053 mtg. hole. for .062 to .094 thick board 2101 solder terminals turrets - x - 1 2 length v .049 .082 board thick- ness .031 .062 - x - 1 2 3 length v .103 .087 .072 board thick- ness .078 .062 .047 - x - 2 3 4 length v .109 .141 .172 board thick- ness .062 .094 .125 - x - 1 2 3 4 length v .062 .094 .125 .156 board thick- ness .031 .062 .094 .125 2316/2317/2708
|